Wiremold C210 White Cordmate II Kit

It was easy to use, painted easily and hasn't fallen off the wall yet. The connections add a bit more thickness. I wish they could possibly make them with click ins so the channels don't have to fit in under them. However with that said would not trade this for any of the other kits or procedures out there. After painting it took me about thirty minutes from start to finish to install.

It is a great item for hiding unsightly wires, but not more than 3 wires in one lines or it won't close. Use a roller brush to paint them and wish that there were more end units.

I ordered this and it was damaged in transit by UPS. I didn't recieve it as it was refused for delivery by the shipping dock. UPS told me about it and I tracked it all the way back to Home and Beyond. After a couple weeks and no new information about this, I called them. They said they would "immediately" ship a new one and apologized for the delay. I was fine up to this point.

After a couple more weeks I called again. This time they said the order was cancelled as a claim had been filed against the first order. I had no idea what they were talking about and wondered what a claim filed by a third party had to do with me not getting what I paid for. They had no answer and I have no kit. They gave me "permission" to get a replacement after the claim is settled. I will not be dealing with this company again. Nice customer service, just ineffective.

I needed to route the TV cable about 20 feet from the source around two walls and a small nook. I ordered 2 of these kits, and could not be happier with the results. I placed the track on the baseboard just above the quarter molding, and it blends right in. You just need to make sure there is enough clearance below the track so that the coupling and corner attachments can snap on. The track sticks very well and I don't think it will ever release without a struggle. When my TV is mounted, I'm going to run a short piece down the wall for the power and cable box cords, and paint it to match. The track is easy to cut with a hack saw.

I am a wire nazi and like all my A/V cables run neat. However, after my new LCD was mounted I had a power cable and HDMI cable ruining the look. I did not want to rip through drywall, route around fireplace vents, drill through 6 studs, and refinish drywall to make it look nice. Maybe one day I will, but not yet. I posted images of the before and after condition.

Wiremold Cordmate II was an ideal solution:
1) Inexpensive
2) Easy to install
3) Very pratical and funtional
4) Looks good
5) Individual pieces available (elbows, corners, etc.)

Install took maybe 1 hour total to plan, measure, cut, and paint (20 minutes of actual work; 40 for paint drying). I painted before install and found that applying paint with a small brush and then using a small, dry roller gave a very finished look. Also make sure your cables are plenty long enough (with some alpha factor) before installing. Do not plan on running a ton of cables through this version - power, HDMI, and maybe a coaxial would be it.

I was very skeptical about the cordmate's ability to hold in corner with thick cables. I had an inside and outside 90 degree elbow within 3 inches which is a lot of force to hold. But the double sided tape is very strong and holding very good.

Perhaps the only minor downside would be ability to add or change cables. It does open, but it takes some pressure. So make sure to feed all wires needed first before taping to wall.

Overall, this wire nazi is very impressed and would highly recommend.